Preparation of 0.5 M EDTA stock solution from anhydrous EDTA free acid

Preparation of 0.5 M EDTA stock solution from anhydrous EDTA

  • EDTA (EthyleneDiamineTetraAcetic acid), a polyamino carboxylic acid, is extensively used in molecular biology experiments as a chelating agent. It sequesters metal ions such as Ca2+ and Fe3+. Metal ions are necessary for the action of many enzymes including DNases.
  • EDTA is commercially available as _ _ _ _ _
    • Anhydrous EDTA (CAS Number 60-00-4, Molecular Weight 292.24)
    • Disodium EDTA dihydrate (EDTA.Na2.2H2O, CAS Number 6381-92-6, Molecular Weight 372.24) and
    • Tetrasodium EDTA tetrahydrate (EDTA.Na4.4H2O, CAS Number 13235-36-4, Molecular Weight 452.23).
  • Anhydrous free acid EDTA is least soluble among all EDTA forms in water. To dissolve anhydrous free acid EDTA in water, a lot of NaOH (3.1 ratio) is added to bring the pH to 8.0.
  • Disodium EDTA dihydrate have better solubility than anhydrous free acid EDTA and is most commonly used for the preparation of 0.5 M EDTA solution.
  • Tetrasodium EDTA tetrahydrate is soluble in water. The resulting solution has pH above 10.0, therefore is not suitable for cell and molecular biology experiments.
  • Here we show preparation of 0.5M EDTA solution from Anhydrous free acid EDTA.

Related posts

Requirements

  • Reagents
    • EDTA
    • NaOH pallet / 10N NaOH solution (for pH adjustment)
    • Deionized / Milli-Q water
  • Equipment and disposables
    • Measuring cylinder
    • Conical flask / Beaker
    • Magnetic stirrer

Composition:

0.5 M EDTA, pH 8.0 at 25°C

Objective:  

Preparation of 1000 ml of 0.5 M EDTA solution, pH 8.0 in water from Anhydrous free acid EDTA (Molecular Weight 292.24)

Preparation

Step 1: Weigh out 146.12 grams EDTA.Na2.2H2O (Molecular Weight 292.24). Transfer to 2 L beaker / conical flask. Add 700 ml deionized / Milli-Q water.

Precaution: Do not dissolve in 1000 ml of deionized / Milli-Q water. In most cases, solution volume increases when a large amount of solute dissolves in the solvent.

Step 2: While stirring vigorously on a magnetic stirrer, add NaOH pellet to adjust the solution pH 8.0.

Tips:
  • ~40 g NaOH pellet is required to adjust the pH 8.0.
  • It is not easy to dissolve EDTA. To dissolve the EDTA completely, solution pH 8.0 is required.

Step 3:  Adjust the volume to 1000 ml with deionized / Milli-Q water. Mix it again.

Step 4:  Transfer the solution to autoclavable bottle. Sterilize the solution by autoclaving (20 minutes at 15 lb/sq.in. (psi) from 121-124°C on liquid cycle)

Tip:
  • Depending on the consumption, one can make small aliquots of solution.
Note:
  • One can sterilize the solution by passing through 0.22 μ filter unit. Filter sterilization removes all suspended particles with size more than 0.22 μ which includes most bacteria their spores but not mycoplasma. However, it does not inactivate enzyme activities (e.g., DNases). Autoclaving inactivates most enzymes except some (e.g., RNases) and kills most microorganisms including mycoplasma.

Storage:

Solution can be stored at 15 – 25 °C (room temperature) for several months.

Applications:

0.5 M EDTA solution is used for the preparation of many solutions including TAE, TBE, DNA loading dye, resuspension buffer (isolation of plasmid), Tris-EDTA, Trypsin-EDTA, etc.

Follow the table to prepare EDTA solution of specific concentration and volume from anhydrous EDTA Acid free (Molecular Weight 292.24).
Conc. / Volume 100 ml 250 ml 500 ml 1000 ml
10 mM 0.29 g 0.73 g 1.46 g 2.92 g
100 mM 2.92 g 7.306 g 14.612 g 29.224 g
0.25 M 7.306 g 18.265 g 36.53 g 73.06 g
0.5 M 14.612 g 36.53 g 73.06 g 146.12 g